The Hattori Fighter

FT100A  FT100 in Cocobolo and Ebony

The Hattori Fighter under the “Hattori” brand is a quite well known and sought-after knife among collectors. It was made in two sizes; the FT-200 was the larger with an OAL of 14.25″ with a 7.63″ blade and the smaller FT-100 with an OAL of 11″ and a blade length of 6″. Both with a polished solid silver nickel hilt. The handles were offered in Cocobolo, Black Ebony and, White Dupont Corian for the smaller model. Oddly, the larger FT-200 was described as being MVS-8 stainless steel while the smaller FT-100 was Aus8. The larger model appears to have been last produced in 2010 whereas the smaller one seems to have been in production until quite recently albeit in limited numbers.

FT200bFT200 Ebony

In either case, it is basically impossible to find either of them new in stores, unless Hattori decides to do another run. Typical of Hattori’s products, the fit and finish is superb and the knife is a true collection piece. When I first encountered this fighter I had assumed that it was a variant of a Loveless Fighter. However it turns out that it actually has French origins. The design was initially created for a project in 1988 to produce a limited number of Commemorative for the 200th Anniversary of the French Revolution. The handle perhaps gives the strongest hint of this history. The originals were made by the late Custom Seki knifemaker Seizo Imai but became widely known later under Ichiro Hattori’s production.

A rare FT-200 version is a limited run reportedly of just 10 pieces which used Buffalo Horn as the handle material.

photo-8

photo-9

 

The most well known version in the U.S. however may be the Junglee “Hattori Fighter”. The original knives were made by Ichiro Hattori and have “Seki Japan” on the ricasso.

Junglee HF Junglee Hattori Fighter

Hattori-fighter-02Made in Seki- MVS-8 Steel

 

BabyHattori Junglee Baby Hattori Fighter

Junglee Knives started in 1985, as the brand name for a group of tooling and machinery companies owned by Mr Shiraz Balolia, who had also acquired the old Gutman name. The unique combination wood/synthetic handle is said to have been designed and patented by S.Balolia himself, who actually holds a great many patents on various designs and machinery. It was available in two sizes, the larger called the “Hattori Fighter” with an OAL of 13.25″ and a 7.75″ blade, and the smaller “Baby Hattori Fighter” with an OAL of 11″ and a 6″ blade, both with a nickel hilt. These knives were introduced to the U.S. market in the mid-late 1990s. The Taiwan versions and these were produced at least until 2008.

While the Hattori made models had “Seki Japan” engraved on the left side of the blade on the ricasso and “MVS-8” on the right side, the Taiwan made models had “440 SS” on the left side and “Taiwan” on the right side.

Taiwan Version

Apart from the unique handle, the Junglee Fighters differ from all other Fighter versions in that they had a serrated section on the spine. When manufactured by Hattori , MVS-8 Stainless was used. Back when Junglee Knives had it’s own website they explained MVS-8 as “an alloy comprised of .85% Carbon, 14% Chromium, .5% Manganese, .5%. Silicon, 2.5% Molybdenum, .15% Vanadium with a hardness between 57-61RC”.

MVS-8 is a proprietary steel made for Masahiro, one of the largest and well known cutlery knife makers in Seki. It also happens to be owned by the Hattori family. Masahiro also manufactures knives for the Tsuge designed brand which is marketed by Kitasho, owner of the Kanetsune brand.

The Junglees originally made by Hattori were MVS-8, at least the larger model, and switched to “440 stainless” when production was later shifted to Taiwan around 2005/2006. No one seems to be sure which “440” it really was, many suggesting and perhaps hoping that it is 440C. But in those days “440” could mean alot of things.(Back then SOG used “440A” to mean Aus6A, and Browning used “440” to mean Aus8A). Amongst collectors, the original Hattori/Seki made Junglee Fighters are considered much more valuable than the Taiwan made ones which were marketed by Smoky Mountain Knife Works at less than half of the price of the originals in the later years.

A fairly recent but discontinued product was a copy of the Junglee fighter blade design by M Tech USA, a maker of tactical knives using “440”.

mtech-cs-tactical-knife-5825-p

The Katz “Alley Kat” models have long been manufactured by Hattori in Seki, however the handle is a Kraton or similar synthetic.

FT100 Katz Alley Kat 6006 and Hattori FT-100

The sizes are different as well, if the site information is accurate. The smaller Alley Kat 6006 has an OAL of 10.75″ with a 6.5″ blade. And the larger Alley Kat 8008 has an OAL of 13″ and an 8″ blade. The blades are described as X70, and described as a “proprietary” Stainless Steel with a Rockwell Hardness of 54-55. However, the Kats Knives site does show this: “About our Steels XT70 – AUS6A – 56 Rockwell “C” Scale Hardness XT80 – AUS8A – 58-59 Rockwell “C” Scale Hardness” So, perhaps that’s all there really is to it. http://www.zknives.com/knives/steels…h.php?nm=xt-70 Kats Knives’ product line consists of knives manufactured in Japan and Spain and generally are considered of high quality, fit and finish, marked chandler Arizona on the left side ricasso and the country of origin on the right side.

Katz Alley Kats Katz Alley Kats 8008 and 6006

AK8008DM

ak8008-dm-1000x1000

Katz 8008 Damascus

The Katz models are the only versions still not “discontinued” however it is possible that they are limited to existing inventory.

Within Japan, Hattori also mades the larger Fighter for Kitasho of Seki, which also owns Kanetsune of Seki. There were two models, the Silver Stream and Silver Stream II, under the “Tsuge” brand label.

The earliest models of the Silver Stream had “Hattori” engraved on the right side of the ricasso.

Tsuge Silver Stream Tsuge Silver Stream

Tsuige SS2 Tsuge Silver Stream II

Both appear to be identical or near identical to FT-200, with an OAL of 13.79″ and a blade length of 7.63″. The original Silver Stream is discontinued , but the Silver Stream II can still be found occasionally and appears to be produced in limited numbers. It also uses MVS-8 and the handle is purple Japanese boxwood. Tsuge is a combat knife brand and named for a Mr Hisayoshi Tsuge, an author, former military journalist, mercenary and French Foregn Legionaire who apparently designs knives based on his military background, but he does not have any production facilities. The Silver Stream II, Model TS-31, was recently reintroduced as a limited serial numbered run of 150. I was lucky enough to pick up No.85.

Another version found only in Japan and long discontinued is a model called “Stag Fighter” made by the late Custom knifemaker Seizo Imai who made gthe first Fighters and sold under his IMAX label. The IMAX model used ivory and stag for the handle, and an Aus8A blade. Overall length is 333mm (13.11 inches) and a Blade Length of 175 mm (6.89 inches). It is thought that this model was last produced in 2012. Unlike other IMAX models, the Stag Fighter appears to have no markings on the blade or ricasso.

imax-fighter Imai Seizo IMAX Stag Fighter

imax-fighter1 Imai Seizo IMAX Stag Fighter

In 2020 using remaining blades and bolsters in Seizo Imai’s shop, the custom knifemaker Fumio Inagaki put together the original fighter using snakewood and rosewood handles, Aus8 blade and Nickel Silver guard.

The Hattori Fighter is a truly beautiful knife to look at, light and nimble as a true “Fighting Knife” should be. It is perhaps the lack of a blackened blade and synthetic handle that we today take for granted for any “fighting knife” that is the heart of it’s charm. In any version it’s a fine addition to any collection.

HATTFT100

DSC_0749

 

DSC_0749-1b

News Flash-

In mid 2019 Hattori introduced a limited edition of the long unseen FT-200C Fighter, the larger fighter with the 7 inch blade. It will also be the last using Cocobolo as a handle material due to international limitations on it’s trade by CITIES. This release commemorates Master Ichiro Hattori’s 80th birthday and carries the kanji character 傘 ”San” from Sanju (傘寿)representing one’s 80th birthday. Only 50 have been made and they are serial numbered on the inner side of the bolster.

As of this writing they are still available from Japanese Knife Direct, in Seki City Japan.

http://japaneseknifedirect.com/Hattori.html

Special thanks to Japan Knife Direct and Anthony Thomas.

February 2015 – Updated August2019-January 2021

 

 

25 thoughts on “The Hattori Fighter”

  1. I have a Junglee Hattori Fighter and a Junglee baby Hattori with the MVS 8 and the Seki JAPAN Marking on the Ricasso for sale

    1. Martin Greschner says:
      December 31, 2017 at 10:54 am
      I have a Junglee Hattori Fighter and a Junglee baby Hattori with the MVS 8 and the Seki JAPAN Marking on the Ricasso for sale

      Please LMK about these two (or any others for sale!). lightknot@comcast.net

  2. I have the FT-200 limited run Buffalo Horn handle . Great knife, but the handle schrinked a bit. But still a beautiful knife. It never cut anything. What would be the price for it now? 🙂

    1. The most recent FT-200 sales found on the internet are for the standard Cocobolo and Ebony handled ones going back to 2012 at
      USD 545.00 on Arizona Custom Knife. A Buffalo Horn handle would be an extremely rare limited edition and pretty much impossible
      to appraise.

  3. I have 2 Junglee Hattori fighter’s. 1 larger model and 1 “baby” Hattori. Unfortunately they are the Taiwanese made knives. Some people have referred to them as junk but the fit and finish are excellent and they look very good. I don’t know much about steel types or manufacturing processes so I’m not sure. The good thing about them is they are NOS with the original boxes and all original packaging and pamphlet. I would take $400.00 for both plus shipping. Thanks. email: taterbuck@gmail.com

  4. I have a Junglee Hattori Fighter with the MVS 8 and the Seki JAPAN Marking on the Ricasso for sale with sheath and box.
    Excellent condition. Make me an offer!

  5. I have one of the Baby Fighters in the US version. Due to the synthetic handle I cannot see the tang. Does anyone know or have pics of the tang design in these versions?

  6. I was wondering. Are all Japanese made Katz knives like the K-300 made bij Ichiro Hattori or did he only made the Ally Kat?

    The K-300 was also made from XT-80 steel.

  7. I have a number of Hattori knives I bought from Japanese Knife Direct all but two are marked Hattori on the blades and no other markings. I believed them to be AUS -8 for some reason. Two others have the Hattori marking and the Japanese symbol. How can one tell if the knives were made in Seki or Taiwan?

    1. The Junglee “Hattori Fighters” had “Seki Japan” engraved on the left side of the blade just before the ricasso. And MVS-8 engraved on the right side.
      These are the originals made by Hattori.
      Later on, Smokey Mountain Knife Works purchased the rights to make these knives (full size and Baby) and they contracted in Taiwan. These knives will state “440 SS” on the left side and “Taiwan”
      Photos have been added to the article for reference.

  8. To whom,

    I have multiple knives and would like to sell some, how do I go about selling them? I will be doing an inventory and trying to begin pricing them, so I’m not quite sure how you might be of assistance but I’m reaching out anyway.

    Hoy

    1. Methods of selling knives in the U.S.
      – Ebay -(they restrict switchblades and butterfly knives)
      – Bladeforums- Buy/Sell/Trade section – You need a Gold Membership or above to sell.
      – Other forum sites, Jerzeedevil, AR15, outdoor oriented forums, etc.

Leave a Reply to Peter Bennett Cancel reply

Your email address will not be published. Required fields are marked *